RECOMMENDED SERVICE SCHEDULE
 

1,000 Miles
    • Change Engine Oil & Filter
    • Inspect Air Cleaner & Service As Required
    • Change Primary Chaincase Lubricant & Clean Magnetic Drain Plug
    • Check/Adjust The Primary Chain
    • Check Clutch Adjustment
    • Change Transmission Lubricant & Clean Magnetic Drain Plug
    • Check & Adjust The Rear-Drive Belt
    • Inspect Brake Pads & Discs For Wear
    • Check Brake Fluid Resevoir Levels & Condition 
    • Inspect Oil Lines & Brake System For Leaks
    • Lubricate The Following:
            • Front Brake Hand Lever, Throttle Control Cables, Throttle, Clutch Control Cable/Hand Lever, & Jiffy Stand
    • Inspect Spark Plugs
    • Check/Adjust The Operation Of Enrichener
    • Inspect Fuel Valve, Lines, & Fittings For Leaks
    • Check Tire Pressure, Inspect Tread & Wheel Spoke Tightness
    • Check & Clean Battery Connection
    • Check Operation Of All Electrical Equipment & Switches
    • Check Stabilizer Links & Engine Mounts
    • Inspect Exhaust System For Leaks, Cracks, & Loose Or Missing Fasteners Or Heat Shields
    • Check The Tightness Of All Critical Fasteners:
            • Hand Controls, Brake System, Axle Nuts, Front Fork Components, Riser, & Handlebar Fasteners
    • Check Rear Fork Pivot Nut Tightness (See Dealer)
    • Check Engine Idle Speed Adjustment
    • Check Front Fork Bearing Adjustment (See Dealer)
    • Road Test



2,500 Miles
    • Change Engine Oil & Oil Filter
    • Inspect Rear Belt
    • Inspect Transmission Lubricant
    • Inspect Brake Pads & Discs For Wear
    • Inspect Fuel Valve, Lines, & Fittings For Leaks
    • Inspect Tire Pressure & Inspect The Tread
    • Inspect Operation Of Throttle & Enrichener Controls
    • Inspect Operation Of All Electrical Equipment & Switches
    • Inspect Battery Connections
    • Inspect Air Cleaner & Service As Required
    • Inspect Oil Lines & Brake System For Leaks
    • Road Test


5,000 Miles (Every 5,000 Miles, ie. 5K, 15K, 25K)
    • Change Engine Oil & Filter
    • Inspect Air Cleaner & Service As Required
    • Change Primary Chaincase Lubricant & Clean Magnetic Drain Plug
    • Check/Adjust The Primary Chain
    • Check Clutch Adjustment
    • Change Transmission Lubricant & Clean The Magnetic Drain Plug
    • Check & Adjust The Belt
    • Lube The Speedometer Cable
    • Inspect Brake Pads & Discs For Wear
    • Check Brake Fluid Reservoir Levels & Condition
    • Inspect Oil Lines & Brake System For Leaks
    •  Lubricate The Following:
            • Front Brake Hand Lever, Throttle Control Cables, Throttle, Clutch Control Cable/Hand Lever, & Jiffy Stand
    •  Check/Adjust The Operation Of Enrichener
    •  Inspect Fuel Valve, Lines, & Fittings For Leaks
​​​​​​​    •  Check Tire Pressure & Inspect Tread
​​​​​​​    •  Check Wheel Spoke Tightness
​​​​​​​    •  Check Front Fork Bearing Adjustment
​​​​​​​    •  Check Operation of All Electrical Equipment & Switches
​​​​​​​    •  Check & Clean Battery Connections
​​​​​​​    •  Inspect Spark Plugs​​​​​​​    
​​​​​​​    •  Check Engine Idle Speed Adjustment
​​​​​​​    •  Road Test



7,500 Miles
​​​​​​​    •  Same As 2,500 Miles Service


10,000 Miles
​​​​​​​    •  Change Engine Oil & Filter
​​​​​​​    •  Inspect Air Cleaner & Service As Required
​​​​​​​    •  Change Primary Chaincase Lubricant & Clean The Magnetic Drain Plug
​​​​​​​    •  Check/Adjust The Primary Chain
​​​​​​​    •  Check Clutch Adjustment
​​​​​​​    •  Change Transmission Lubricant & Clean The Magnetic Drain Plug
​​​​​​​    •  Change & Adjust The Belt
​​​​​​​    •  Lube The Speedometer Cable
​​​​​​​    •  Inspect Brake Pads & Discs For Wear
​​​​​​​    •  Check Brake Fluid Reservoir Levels & Condition
​​​​​​​    •  Inspect Oil Lines & Brake System For Leaks
​​​​​​​    •  Change Fork Fluids & Adjust Neck Bearings To Spec
​​​​​​​    •  Lubricate The Following:
        ​​​​​​​    •  Front Brake Hand Lever, Throttle Control Cables, Trottle, Clutch Control Cable/Hand Lever & Jiffy Stand
​​​​​​​    •  Lubricate & Adust Steering Head Bearings
​​​​​​​    •  Check Engine Idle Speed Adjustments
​​​​​​​    •  Check/Adjust The Operation Of Enrichener
​​​​​​​    •  Inspec Fuel Valve, Lines, & Fittings For Leaks
​​​​​​​    •  Check Operation Of All Electrical Equipment & Switches
​​​​​​​    •  Check & Clean Batter Connections & Test Charging System
​​​​​​​    •  Change Spark Plugs
​​​​​​​    •  Scheck Tire Pressure & Inspect The Tread
​​​​​​​    •  Check Wheel Spoke Tightness
​​​​​​​    •  Check Stabilizer Links & Engine Mounts
​​​​​​​    •  Check The Tightness Of All Critical Fasteners:
        ​​​​​​​    •  Hand Controls, Brake System, Axle Nuts, Front Fork Components, Riser, & Handlebar Fasteners
​​​​​​​    •  Road Test


LET OUR FACTORY TRAINED TECHNICIANS ENSURE YOUR BIKE IS READY FOR THE NEXT ADVENTURE!
​​​​​​​​​​​​​​
  ​​​​​